Sequent Microsystems
Updated on:
Time to Read: 2m 45s
SEQUENT MICROSYSTEMS LAUNCHES ON KICKSTATER
REMARKABLE LOW COST INDUSTRIAL AUTOMATION SOLUTION
RASPBERRY PI MegaIO-IND CARD FOR INDUSTRIAL AUTOMATION OFFERS 4-20mA I/O's, 0-10V I/O's, OPTICALLY ISOLATED DIGITAL I/O's AND 10A/250V RELAYS
20 July 2018 Cupertino, CA - Sequent Microsystems, a tech startup from Cupertino, CA has launched a Kickstarter campaign for a new industrial expansion card for the Raspberry Pi platform. Loaded with inputs, outputs, and relays, the card challenges the traditional Industrial Automation market in features and cost. According to the KS page, the card attempts to integrate as many Industrial Automation functions as possible into the small, credit card format of the Raspberry Pi. Shipment of these cards is expected by January 2019. "Industrial Automation sensors and actuators use 4-20mA current loops, 0-10V levels and optically isolated I/O's. Traditional controllers have limited resources and cost hundreds of dollars" says Mihai Beffa, Sequent's CEO. "MegaIO-IND card brings to the Industrial Automation world a compact, low cost and expandable solution packed with features." The MegaIO-IND card features Optically Isolated 4-20mA Inputs and Outputs, 0-10V Inputs and Outputs, Optically Isolated Digital Inputs and Open Drain Outputs, Optically and Galvanically Isolated 10A/250V Relays with status LED's, Standard Communication Ports, Configurable Interrupts and a Real Time Clock with Battery Backup. The MegaIO-IND can be ordered with screw-type terminal blocks, as shown in the picture below, or upgraded for a small extra charge to pluggable connectors. Pluggable connectors offer a convenient way of removing the cards after field installation, for repairs or upgrades. With an MSRP of only $99, the first tier of the Kickstarter campaign of 50 pieces is offered at 50% off with an introductory price of only $50. The next two tiers of 100 cards offer discounts of 40% and 30% respectively, and the rest of the cards at $85 (15% off MSRP). The Kickstarter campaign also offers a few low cost accessories to the MegaIO-IND and Raspberry Pi that can be added to any pledge:- Raspberry Pi 8-Relay Card ($20) - add 8 additional relays
- Raspberry Pi DIN-Rail Kit ($7) - install Raspberry Pi on a DIN-Rail
- Raspberry Pi Breakout Card ($9) - provide screw terminals for all GPIO pins
- IO Terminal Block Upgrade ($15) - upgrade IO screw terminals to pluggable
- Relay Terminal Block Upgrade ($5) - upgrade Relay screw terminals to pluggable
- Four Optically Isolated 4-20mA Inputs
- Four 4-20mA Outputs
- Four 0-10V Inputs
- Four 0-10V Outputs
- Four Optically Isolated Digital Inputs
- Four Optically Isolated Open Drain Outputs
- Four Optically Isolated 10A/250V Relays
- Four Relay LED's
- Four General Purpose LED's
- RS485, CAN, 1 Wire communication
- Real Time Clock with Battery Backup
- Configurable Interrupts